My Device Forums |
October 05, 2024, 12:22:15 AM | |||
|
News: ELK/NESS M1 driver released! |
Home | Help | Search | Login | Register |
1
on: October 02, 2016, 04:22:13 PM
|
||
Started by Matt - Last post by travisbenelli2 | ||
Just Curious, The APL3 Driver had station selection and feedback via a Data list. The Apl4 driver doesnt seem to have this....is this correct?
|
2
on: April 11, 2016, 05:01:52 PM
|
||
Started by Matt - Last post by Matt | ||
Hi Andrew, Short answer is the driver doesn't currently support this. I've just added a new function that should fix this for you. I've emailed a copy, if you could confirm it works before I make it publicly available. Cheers, Matt. Is this option in the current release of the driver? I can't figure out how to do it. No, its in a beta that hasn't been made public yet. Send me a PM with your email address and i'll share it with you. |
3
on: April 02, 2016, 04:14:29 PM
|
||
Started by Matt - Last post by vult2000 | ||
Hi Andrew, Short answer is the driver doesn't currently support this. I've just added a new function that should fix this for you. I've emailed a copy, if you could confirm it works before I make it publicly available. Cheers, Matt. Is this option in the current release of the driver? I can't figure out how to do it. |
4
on: September 15, 2015, 06:58:22 PM
|
||
Started by Matt - Last post by Matt | ||
Dear Mat, will this Driver work with new Applt TV 4 (tvOS)? Thanks. BR Peter I'm assuming this is you being funny, right? Given it's not available to the public (myself included) there is no way to know. Once I can buy one, I will. I will share the results then. |
5
on: September 15, 2015, 06:09:54 AM
|
||
Started by Matt - Last post by Peter911 | ||
Dear Mat,
will this Driver work with new Applt TV 4 (tvOS)? Thanks. BR Peter |
6
on: September 07, 2015, 09:41:41 AM
|
||
Started by fkanderson - Last post by Matt | ||
I am having a lot of difficulty controlling the Oppo BDP-103D Blu-Ray player. At random times the driver ceases communication with player. Sometimes it will not turn the player on from a standby condition. Sometimes it just stops working all together while the player is on. The player is running BDP10X 77 0827 Firmware, the most current. The loader version is 7B1300 8550 1300, the Sub Version is MCU 13D-01-0618, and the Chip Version is BD10X 131030. The player is connected to an XP-3 controller slaved to an XP-8s processor. Both units are running the most current firmware. I have tried loading the driver on both the XP-8s and XP-3 with no improvement. The driver version is 3.2. Does anyone have any ideas on how to make the system more stable? I've been running an Oppo 103 via 232 for more than a year and it's never missed a beat. Sounds like it could be a licensing problem. Please contact me via email (address is on our website) so I can get some debug logs from you. Cheers, Matt. |
7
on: September 06, 2015, 06:34:55 AM
|
||
Started by fkanderson - Last post by fkanderson | ||
I am having a lot of difficulty controlling the Oppo BDP-103D Blu-Ray player. At random times the driver ceases communication with player. Sometimes it will not turn the player on from a standby condition. Sometimes it just stops working all together while the player is on. The player is running BDP10X 77 0827 Firmware, the most current. The loader version is 7B1300 8550 1300, the Sub Version is MCU 13D-01-0618, and the Chip Version is BD10X 131030. The player is connected to an XP-3 controller slaved to an XP-8s processor. Both units are running the most current firmware. I have tried loading the driver on both the XP-8s and XP-3 with no improvement. The driver version is 3.2. Does anyone have any ideas on how to make the system more stable?
|
8
on: August 20, 2015, 10:57:05 AM
|
||
Started by Matt - Last post by travisbenelli2 | ||
So I have purchased 3 AppleTV 3rd Generation IP drivers. 3 separate projects one appleTV each.
The first project is using an XP6 RTI Processor and an AppleTV 2nd Gen. Troubles include constant disconnection from AppleTV, loss of metadata while still maintaining control, Then the reverse loss of metadata with control. The remote chain setup page on appleTV shows 5-10 remote chain connections after a few days of functional use. AppleTV control feedback metadata always shows connected but control is sporadic. The second project is using an XP8s RTI Processor and an AppleTV 3rd gen. Troubles include complete disconnection within 20 minutes. once I delete chain and reattach remote it works for a short time before disconnect again. The Third project is using another XP6 RTI processor and an AppleTV 3rd gen. Troubles mirror the 1st scenario except the feedback metadata follows the function of the remote. If its working it says yes. When it doesn't it says no. The remote chain has to be erased and reset for it to work. Any input would be helpful as the drivers are useless at this point. |
9
on: June 25, 2015, 05:11:15 PM
|
||
Started by Matt - Last post by Matt | ||
Hi, I purchased an Apple TV IP driver, and installed it on an RTI XP processor. I have 3 ATVs to control. With the first ATV everything is ok, included coverart and control but with the second I can't control anything. in the ATV settings -> remotes I can see the little chain in "My Device" and the configuration is the same for all the ATVs, so I can't understand why it doesn't respond. Thank you Giacomo Hi Giacomo, Please check that if you use using the "selected unit" method of control, that when you change to the control page for the 2nd/3rd ATV that you are calling the System -> Set Current() function. If you don't do this, then all commands will be going to the first ATV. Matt. |
10
on: June 25, 2015, 04:46:42 PM
|
||
Started by Matt - Last post by jackpollo | ||
Hi, I purchased an Apple TV IP driver, and installed it on an RTI XP processor.
I have 3 ATVs to control. With the first ATV everything is ok, included coverart and control but with the second I can't control anything. in the ATV settings -> remotes I can see the little chain in "My Device" and the configuration is the same for all the ATVs, so I can't understand why it doesn't respond. Thank you Giacomo |